Cart 0
Darkglass Electronics Vintage Deluxe v3 - Classic Tone, Refined

Darkglass Electronics

Darkglass Electronics Vintage Deluxe v3 - Classic Tone, Refined

$ 319.99

The Darkglass Electronics Vintage Deluxe v3 is an upgraded version of the Vintage Deluxe. The v3 features the warm, tube-like refined classic tones of the Microtubes Vintage and adds a 4-band active EQ, Low and High mid frequency switch, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag.

Comes with a FREE compatible power supply! (While supplies last)


Blend: Mixes the clean input signal with the overdriven signal.
The clean signal remains at unity gain while the volume of the
overdriven signal is set by the Level knob, allowing for fine
control of the blend ratio.

Level: Sets the volume of the overdriven signal.

Drive: Sets the amount of saturation in the overdriven signal.

Grunt Switch: Sets the amount of low frequency content to
saturate by selecting between three different bass boost
levels before the clipping stage.

Attack Switch: Sets the amount of treble content to saturate:
The "Boost" setting emphasizes the treble content extra
clarity and presence. The "Flat" position leaves this register
untouched while the "Cut" position will reduce the amount of
high frequencies being saturated.

Low: +-12dB @ 100Hz | Low Mids: +-12dB @ 500Hz

Hi Mids: +-12dB @ 1.5 kHz | Treble: +-12dB @ 5kHz

Low Mids Switch: this switch change the center frequency of
the Low Mids from 1kHz to 500Hz.

Hi Mids Switch: this switch change the center frequency of
the Hi Mids from 3kHz to 1.5kHz.

Parallel Output: A passthrough for your input signal, useful
for parallel processing.

Direct Output: A balanced version of the ¼” output, useful for
running into PA’s or studio mixing console

Technical Specifications

  • Input Impedance 500k
  • Output Impedance 1k
  • Current Consumption ~20mA
  • Voltage 9V DC (Center Negative)
  • Dimensions
  • Width 106 mm (4.21 in)
  • Height 120 mm (4.72 in)
  • Depth 45 mm (1,77 in)
  • Weight 350 gr (0.78 lb)

Power: The Vintage Deluxe v3 has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries. Warning: Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.


In the interest of continuous improvement, specifications are subject to change without notice. If you have any questions, please don’t hesitate to contact us at www.darkglass.com.

Note: Due to the value of the Darkglass Electronics Vintage Deluxe v3 - Classic Tone, Refined we may require that an adult be present to accept delivery.

Share this Product

More from this collection