The Darkglass Electronics Vintage Microtubes - Classic Reel To Reel Tone, is the Darkglass Electronics tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.
Comes with a FREE compatible power supply!
Blend: Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.
Era: Interacts with the Drive knob to shape the character of the pedal. Dial it down to get the warm midrange tones of the 70s or crank it up to get the punchy metallic tones of 80s and 90s rock.
Level: Sets the volume of the overdriven signal.
Drive: Sets the amount of saturation in the overdriven signal.
- Input Impedance 500k
- Output Impedance 1M
- Current Consumption ~17mA
- Voltage 9V DC (Center Negative)
- Width 75 mm (2.95 in)
- Height 111 mm (4.37 in)
- Depth 45 mm (1,77 in)
- Weight 250 g (0.55 lb)
In the interest of continuous improvement, specifications are subject to change without notice. If you have any questions, please don’t hesitate to contact us at www.darkglass.com.
Power: The Darkglass Electronics Vintage Microtubes has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries. Warning: Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.